Features

• Wide range of display functions
  Points can be classified into maximum 5 groups and a trend screen, a data screen, a bargraph screen or a multi-screen can be displayed for each group. A historical trend screen, a real-time/historical trend screen (dual trend) or an alarm summary screen can be displayed, too. A functional jog dial allows quick selection of screens.
• Storage of measured data
  The measured data (maximum 654,000 data) are stored in the 1.2MB internal memory by 6 kinds of storage mode. The measured data can be copied from the internal memory to a 3.5" floppy disk. Total 200 of message event and alarm event can be stored.
• Easy processing of measured data
  Various kinds of screen make management and processing of the measured data easy. The historical data, which have been stored in the internal memory or saved in the floppy disk, can be displayed and compared. A search function of the specified data is provided.
• Two models of continuous input type and standard input type
  Two models, continuous input type (measuring cycle about 0.1 second/4-point) and standard input type (measuring cycle about 5 seconds/6-point), are offered for various applications.
• Safety sandards
  The recorders are conformed to CE-marking, UL (approval pending), and CSA (C-UL) (approval pending). The door and bezel are protected. (IP54)
• Easy settings
  The interactive system on the window opened by selecting items from the menu screen allows easy programming. Using the engineering port, you can easily set up the parameters by using the parameter programming software [PASS] through a personal computer, too.
• Data management by message function
  Messages (maximum 30 alphanumeric characters) can be written on the trend screen. Up to 10 kinds of message can be pre-registered and written by the keyboard, communications, or remote contacts. The message can be written on the historical trend screen, too.
• Communications
  The optional communications interface are RS-232C, RS-422A and RS-485 using the MODBUS protocol. The MODBUS communications link makes the system configuration with your personal computer.
• Package software
  The data acquisition software [KIDS] and the parameter programming software [PASS] are optionally prepared for easy data management by your personal computer.

Models

Types	Input points	Input speeds	Models
Standard input type	6-point	5 seconds/6-point	BR1761-N00
Continuous input type	1-point	0.1 second	BR1713-N00
	2-point		BR1723-N00
	3-point		BR1733-N00
	4-point		BR1743-N00

Communications interface of RS-232C, RS-422A or RS-485: Option
2-port communications is available. (option)

Specifications

• Input specifications

Measuring points	Standard input type	6 points
	Continuous input type	1, 2, 3 or 4 points
Input signals	Universal input (DC voltage 10 kinds, Thermocouple 36 kinds, Resistance thermometer 11 kinds, DC current (by shunt resistors)
Range setup	Programming of input types and ranges by the keyboard. The measuring range is automatically selected by the range programmed.
Scale setup	Programming of maximum values, minimum values and engineering units from the keyboard.
Accuracy rating	0.1% 1 digit (DC voltage input)
Measuring cycles	Standard input type	About 5 seconds/6-point
	Continuous input type	About 0.1 second/4-point
Reference junction compensation accuracy	K, E, J, T, N, Platinel	Maximum 0.5
	R, S, Ni-NiMo, AuFe-Cr, WWRe5-26, WWRe0-26, U, L	Maximum 1.0
	(The above errors are added to the accuracy ratings for the internal reference junction compensation.)
Burnout	Detection of signal disconnection for thermocouple inputs and resistance thermometer inputs Up-scale burnout, down-scale burnout or burnout disabled is selectable for each input.
Input resistance	Thermocouple inputs	About 8M
	DC voltage inputs	Less than 2V: about 8M, 5V to 50V: about 1M
Allowable signal source resistance	Thermocouple inputs (burnout disabled) DC voltage inputs(maximum 2V)	Maximum 1k
	DC voltage inputs ( 5V to 50V)	Maximum 100
	Resistance thermometer inputs [Pt100(1), PT100(2), JPt100]	Maximum 10 per wire 3 wires - same resistance
Input correction	Zero, span and shift adjustments for each channel

• Display specifications

• Memory specifications

• Alarm specifications

• General specifications

Rated power voltage	100 to 240VAC, 50/60Hz
Power consumption	Maximum 45VA
Power failure protection	Programmed parameters stored into EEPROM memory, Data stored into flash memory, Clock circuit and data sustained for minimum 6 years by a lithium battery (at the operation more than 8 hours/day)
Environmental conditions	Reference operating condition
	Ambient temperature/humidity range		21 to 25, 45 to 65%RH,
	Power voltage		100VAC 1%
	Power frequency		50/60Hz 0.5%
	Attitude		Left/right 0 degree, Forward tilting 0 degree, Backward tilting 0 degree
	Warm-up time		More than 30 minutes
	Normal operating condition
	Ambient temperature/humidity range		0 to 50, 20 to 80%RH On using a floppy disk: 5 to 40
	Power voltage		90 to 264VAC
	Power frequency		50/60Hz 2%
	Attitude		Left/right 0 degree, Forward tilting 0 degree, Backward tilting 0 to 20 degrees
Weight	About 3.2kg
Alarm output (option)	6 points

• International safety standards

Options

Options Specifications Remote contacts/alarm output Remote Contacts The following operations are available by contact input (4 points) and common (2 points) signal. (parameter connection) (1) Data memory trigger When the conduct signal is changed to ON from OFF, the data storage into the internal memory starts. (2) Data memory signal During ON of the conduct signal, the data is stored into the internal memory (3) Message display When the conduct signal is changed to ON from OFF, pre-registered message is displayed. (4) Totalising reset Reset of the totalising data (All channels together) Alarn Output Independent output at alarm activation: 6 points Contact rating MOS relay output 240V(AC,DC) 50mA resistive load Mechanical relay output* 100VAC 0.5A resistive load 240VAC 0.2A resistive load 100VDC 0.3A resistive load * Not conforming to CE-marking, UL and CSA (C-UL) Communications RS-232C, RS-422A or RS-485 (to be specified) MODBUS protocol (RTU/ASCII) Functions: Data transmission, Parameter programming, Operation, Data communications input 2-port communications For a host computer: Refer to the above For low-order communications: By connecting with CHINO's instruments, treats the data from the instruments as the data communications input. Low-order communications: RS-422A or RS-485 (to be specified) Instruments: Recorders - BR1000, AL3000, AH3000 Controllers - DZ1000, DZ2000 MODBUS protocol Mathematics The following maths functions can be applied to the measured data. The maths functions can be also applied to the calculated data. (1) Arithmetic, (2) Square root, (3) Logarithm, Natural logarithm,(4) Exponential, (5) Maximum, minimum, average, (6) Temperature/humidity Totaliser Totalising measured data or calculated data (1) Interval: 1 minute to 24 hours or no interval (2) Start time: 0 hour 1 minute to 23 hours 59 minutes Daily report file Creates a daily report file by specifying channels, time (optional time, max. 24 points) and the following items. (1)Instant vale, (2) Maximum value in block, (3) Minimum value in block, (4) Average value in block, (5) Maximum value in day, (6) Minimum value in day, (7) Average value in day Shunt resistor for current input For measuring current by adding 250 or 20

Model RZ-TPS01 Power Supply Unit for transmitters

This unit, which is designed for back-to-back mounting to a recorder, is a dc power supply unit for up to 6 transmitters.